English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Advantages of the equipment:
1, The inverter part is controlled by automatic frequency tracking, and the duty cycle can be adjusted steplessly. It can adjust the power in real time to reduce the loss when heating bars of different diameters, and has good starting performance.
2, Working frequency 3-8KHz.
3, Compared with the old-fashioned thyristor, it is small in size, energy-saving and easy to operate, and can save 10-15% of electricity.
4, The uncontrollable rectifier has small harmonics, and the power factor is ≥0.93.
5, Full protection: with sound and light alarm system for overvoltage, water shortage, overcurrent, overheating, and lack of equal.
Main Technical specifications of electric smelting furnace:
1, The inverter part is controlled by automatic frequency tracking, and the duty cycle can be adjusted steplessly. It can adjust the power in real time to reduce the loss when heating bars of different diameters, and has good starting performance.
2, Working frequency 3-8KHz.
3, Compared with the old-fashioned thyristor, it is small in size, energy-saving and easy to operate, and can save 10-15% of electricity.
4, The uncontrollable rectifier has small harmonics, and the power factor is ≥0.93.
5, Full protection: with sound and light alarm system for overvoltage, water shortage, overcurrent, overheating, and lack of equal.
Main Technical specifications of electric smelting furnace:
| Model | KJ-90 |
| Max input power | 90KW |
| The smelting capacity for copper | 120kg |
| Frequency | 1~10KHZ (according to the workpiece heating requirements) |
| Output current | 5~45A |
| Output voltage | 70~550V |
| Input voltage | 380V 3 phase, 50/60 HZ |
| Cooling water requirements for the whole furnace set | >=0.5MPa, >=20L/min |
| Cooling water requirements for the power supply machine | >=0.5MPa, >=20L/min |
| Duty cycle | 100% 24 consecutive hours |
| Water interface for the power supply | One inlet, and three outlets |
| Cooling system | Water tower(Not included in this quotation) |
